How to Write Sound Effects in a Story or Script
There's no single way to write a sound, because the right way depends on what you're writing. A novel, a screenplay, a podcast and a comic each have their own habit. Below is how to do it in each one, with short examples to copy. You can hear every sound word on this page, thanks to my list of sound effect words and my free sound effects library.
Quick answer
It depends on the format:
- Story or novel: fold the sound into the verb ("the door creaked"). If you spell a sound out, put it in italics and keep it rare.
- Screenplay: put the key sounds in CAPS inside the action lines ("the door SLAMS").
- Audio drama or podcast: put each cue on its own line: "SFX: RAIN ON A TIN ROOF".
- Comic: draw the sound word into the art, sized and shaped to match the volume.
Want to hear what you're writing? Play and download the sounds in my free library.
How to Write Sound Effects in a Story
On a page, a sound only exists if you describe it. There are two ways to do that. The first is to fold the sound into your verbs, nouns and adjectives, and it's the one to use most of the time. The second is to spell the sound out as a word, like thud, which gives you a bigger effect and wears out fast.
Fold the Sound Into the Verb
A flat sentence tells the reader that something happened. A good one lets them hear it:
- Before: The door opened slowly.
After: The door groaned open on its rusty hinges. - Before: There was rain on the roof.
After: Rain drummed on the roof, harder with every minute. - Before: A fly was in the room.
After: A fly bumped and buzzed against the window.
Nothing in those sentences is spelled out, and you can still hear all three. That's the trick most editors want: the sound lives in groaned, drummed and buzzed, and the reader never notices you doing it.
Spelling a Sound Out
Sometimes you want the sound itself on the page, when it's a shock or the moment's built around it. Put it in italics, inline or on its own line:
- She dropped the glass and it hit the tiles with a crash, then nothing.
- The footsteps stopped outside her door.
Knock.
Knock. - The pipe clanged once overhead, clong, and the whole house seemed to listen.
A few rules keep it from looking silly:
- One exclamation mark at most. Bang! is fine. BANG!!! reads like a shout in a playground, unless you're writing exactly that.
- Stretch letters only when the sound stretches. A siren can go weeeooo, because it rises and falls. A door slam can't, so sllaaam looks wrong.
- Use it sparingly. One spelled-out sound every page or two is plenty. If a reader notices the sound words, there are too many.
- Stay consistent. Pick italics or plain, and one spelling for each sound (thud, not thud then thunk then THUD), and keep it all the way through.
Match the Genre and the Narrator
A thriller works with a few sounds, each one sharp: a floorboard, a heartbeat, a phone buzzing on a table. Silence does the rest. A picture book for small children can be packed with splish, splash and boing, because the noises are the fun. A fantasy narrator who speaks formally wouldn't say kerplunk. A funny first-person narrator might. The sound should sound like whoever's telling the story.
Say How the Sound Hits the Character
The strongest sound writing isn't the sound at all. It's what the sound does to someone. "The gunshot was loud" says nothing. Compare:
- The shot cracked across the valley and every bird in the trees went up at once.
- The thunder was so close that she felt it in her teeth.
- The silence after the crash was worse than the crash.
The reader hears the sound through the character's body, which is how you'd hear it too.
Sound Words a Story Writer Uses Most
These are the sound words that turn up again and again in fiction. Press a tile to hear it, so you know which word fits the noise you've got in your head. Each one plays a sound from my library, picked for the word. There's a much bigger list, sorted by what makes the noise, in my guide to sound effect words.
One sudden, sharp shot
Gunshot soundsOld wood or a hinge, slowly giving way
Door Creaking soundsSomething heavy landing, dull and short
Thud soundsA lot of things breaking at once
Glass Breaking soundsSomething big sweeping past through the air
Whoosh soundsA steady hum, like a neon light or an insect
Electricity soundsA foot or an object hitting water
Water Splash soundsKnuckles on wood, polite or not
Door Knock soundsA small, neat mechanical snap
Button Click soundsWater falling one drop at a time
Water Drop soundsA door shut hard and loud
Door Close soundsWood popping and snapping in a fire
Fire sounds
How to Write Sound Effects in a Screenplay
In a screenplay, sounds go in the action lines, the lines that describe what we see and hear. The usual rule is to put the sounds that matter in CAPS: a GUNSHOT, a SCREAM, the door SLAMS. That helps the sound team spot the cues, and it tells the reader where to look.
- Capitalise what matters, not what's there. Rain and traffic in the background stay lowercase. A sound that changes the scene, like a phone ringing in an empty house, gets the capitals.
- Spec script or shooting script? The caps rule is looser in a spec script, the kind you write to sell. Many writers use only a few capitals there, and some none at all. A shooting script is stricter, because the people who make the film use it to pull out every sound cue.
- Mark sounds you can't see. Say where they come from: "a horn BLARES outside" or "we hear a floorboard CREAK above". For a voice you can't see, put (O.S.) for off-screen after the character's name, or (V.O.) for a voice-over.
- Use line breaks for rhythm. A short line on its own gives a sound room to land. "A BANG. Silence. Then another BANG." works best as separate lines.
- Write what we hear, not how to make it. "A floorboard CREAKS" is enough. You don't need to say what to record.
Here's a short scene on a script page, with the format used the way it's usually written:
Notice that the rain isn't capitalised, because it's just the room. The CREAKS, BANGs, CLICK, RINGS and SLAMS are the moments. Screenplays are set in Courier, which is why the example above is too.
How to Write Sound Effects for an Audio Drama or Podcast
In audio, the sound is all you've got, so every cue gets its own line and a number. The people mixing it want to see the cue, what the sound's meant to be, and whether it sits under the voices or stands out.
- Label every cue. Write SFX: or MUSIC: first, then the sound in CAPS, on its own line. "SFX: RAIN ON A TIN ROOF."
- Number them. Cue numbers make it easy to say "cue 5 is too loud" in the edit.
- Add the detail the mixer needs. How loud (LOW, UNDER THE SCENE), how long (FOUR RINGS) and how it ends.
- Use FADE and CROSSFADE. FADE IN and FADE OUT start and end a sound. CROSSFADE moves one sound into another, like rain turning into wind.
- Put voice directions in brackets. A note like (WHISPERING) goes before the line it changes.
An example page from a short audio drama:
And here are the sounds from those cues, in the same order, so you can hear the scene:
Reading it out loud with a group? Put the cues on my free soundboard and play each one on a keyboard key, right when the actor reaches the line. It's the easy way to run a live read-through or a radio play.
How to Write Sound Effects in a Comic or Manga
In a comic, the sound is a picture. It's drawn or lettered into the art, usually outside the speech bubbles, and how it looks tells the reader how it sounds.
- Size is volume. A huge KRAKOOM across a whole panel is a big explosion. A tiny tik in a corner is a clock.
- Shape is feeling. Jagged, spiky letters for sharp sounds like a crash or a crack. Smooth, round letters for soft ones like a hum or a yawn. Wavy letters for a sound that wobbles.
- Place it at the source. Put the sound next to what makes it, and let it follow the direction of movement, so a whoosh trails behind the thing that flew past.
- Write it for the letterer. If you're scripting for an artist, put the sound on its own line, like "SFX: KRAK (big, jagged, over the door)".
Manga leans on sound words even more than western comics, and often letters a sound for something that has no noise at all, like a heartbeat or silence itself.
How to Write Sound Cues in a Stage Play
On stage, a sound is a cue for the sound operator, who plays it at a precise moment. Each one goes on its own line, numbered, and sits in the script where it should happen.
- Number the cues in order: "SOUND CUE 4: Thunder, close."
- Say when to play it, on a line or an action: "(On Maya's 'Who's there?')".
- Keep it short. The director and the operator will add the detail in rehearsal.
Common Mistakes When Writing Sound Effects
- Too many. A page full of boom, crack and whoosh stops sounding like anything. Save them for the moments that matter.
- Using the wrong format's habit. CAPS in a novel shout. Italics on every line of a screenplay crowd it. Use each format's own style.
- Spelling it out and explaining it. "Crash! The glass crashed to the floor with a loud noise." That's the same sound three times. Pick one.
- Telling instead of showing. "It was loud" gives the reader nothing. Show what the sound did to the room or the person.
- Mixing styles. Italics in chapter one and capitals in chapter five looks like a mistake.
- Making up words that don't sound like anything. If a reader can't hear it, use a verb instead.
Hear What You're Writing: Free Sound Effects
The easiest way to pick the right sound word is to hear the sound. My free sound effects library has thousands of sounds to play first and download as MP3s. They're free for personal and commercial projects, including YouTube, TikTok and client work, and you don't have to credit me, though a link back is appreciated. Just don't resell them or share them as a download pack.
If you're turning your script into a video, here's how to add sound effects to a video, and if you'd like to record your own, here's how to make sound effects at home.
Free sound effects library
Doors, rain, footsteps, thunder and thousands more, ready to play. Hear the sound first, then write it.
Frequently asked questions
How do you make a sound in a story?
Name the sound inside the verb or the noun: the door creaked, a wasp buzzed against the glass, the kettle shrieked. If you want the sound itself on the page, spell it once in italics, like the door gave a long, low creak, and then describe how it lands on your character.
What are some examples of sound effects in writing?
Bang, thud, crash, creak, whoosh, buzz, splash, knock, click, drip and crackle are the ones writers reach for most. They're called onomatopoeia, words that sound like what they name. Every one of them has a sound you can hear in the list above.
How do you type a sound in text?
In a story, put it in italics or on its own line, like Thud. In a screenplay, use CAPS inside the action line, like the door SLAMS. For an audio drama or podcast, put a cue on its own line, like SFX: RAIN ON A TIN ROOF. In a comic, draw the sound word into the art.
Do you italicise sound effects?
In prose, yes, when you spell a sound out as its own word, like crack or thump. If the sound is built into a verb, like the branch cracked, it's just a normal word and stays plain. Pick one style and stick to it all the way through.
Should sound effects be capitalised in a script?
In a screenplay, capitalise the sounds that matter to the story, like a GUNSHOT or a SCREAM, and leave background sounds like rain or traffic lowercase. In a spec script, many writers capitalise very little. Shooting scripts are stricter, because the sound team reads them.
How do you write a sound effect in dialogue?
Put the sound in the action line around the dialogue, not inside the spoken words, unless the character is actually saying it. If a character makes a noise out loud, like a sigh or a laugh, write it in a parenthetical or as part of the line, like MAYA (sighing). Anything the room makes goes in the action.
How do you write sound effects in a comic?
Draw them into the art as big lettering, usually outside the speech bubbles, with the size and shape matching the volume: huge and jagged for a crash, small and thin for a drip. In your script for the artist, put the sound on its own line, like SFX: KRAK, so the letterer knows what to draw.
How do you write an off-screen sound in a script?
Add O.S. after the character's name for a voice you can't see, and for a sound, say where it comes from or that we hear it, like a car horn blares outside, or we hear a floorboard creak above. Capitalise the sound if it's a story beat.
How many sound effects are too many in a story?
If you notice them, you've probably got too many. A good rule is one spelled-out sound word every page or two, and the rest folded into verbs. Save the italic ones for moments when the sound matters, like a floorboard creak in a thriller.
Where can I get sound effects to play with my script or audio drama?
My free sound effects library has thousands of sounds you can play and download as MP3s, free for personal and commercial projects. For a live read-through, you can put them on my free soundboard and play each one on a keyboard key.


